Here is the end result.
This particular kitchen has quite a bit of height above the cabinets so I wanted to put some artwork up there. I wanted something graphic and modern that would bring in some color; so I came up with this "EAT" sign. This is a quick and cheap project and I loved how it turned out.
Start with a piece of plywood. You can pick it up at Home Depot or Lowes, and they'll cut it to any size you want. This one is about 20x35 and I had it left over from another project.
You'll also need to print out whatever image you want to transfer onto the plywood. I typed "EAT" in a Word document in font size 600; each letter took up a full page. The font is "Fiesta" and you can download it free here. I also printed out the fork and spoon image which you can download here.
Next prime your plywood with white paint primer using a roller. This step isn't completely necessary, but I did it to make sure my green paint would be saturated enough.
Confession: I was going to have a nice styled picture for each of the remaining steps like a good blogger - but I ended up frantically finishing it at about 11:00 at night with no time or patience for pictures. This is how I do most of my projects. Whoops.
After your primer dries, apply two coates with a roller of your desired color. I used Olive Marinade by Valspar.
Allow paint to dry. Then, using graphite paper - trace your printed image onto the wood with a pencil. Lay the graphite paper, graphite side down, on the wood. Line up your printed images and place over the graphite paper. Trace the outline of each letter, and the fork and spoon, with a pencil.
Finally, fill in your traced outline with a paint pen. This is the easiest part. I'm not too steady with a paint brush, and so paint pens to the rescue. I picked mine up at Michael's.
And you're done! Really cheap, pretty easy.
No comments:
Post a Comment